Thursday, 14 January 2016

Full Tutorial: How to Share your Psiphon, Simple Server free data others



Sharing your free internet vpn connection is really cool if you’re successfully running any of the tweaks on your android phone. Any of the Simple Server, OpenVPN, Psiphon, DroidVPN cheats and free browsing can be shared or tethered via WiFi Hotspot or USB with another android phone or pc. Today I’m going to show you how to create a Wi-Fi Hotpot and share your tweaked free data with other devices.

Normally, the Android tethering and hotspot most times refuses to allow other devices to access and share your free internet data connection, therefore the 3 most reliable ways of creating, sharing or tethering your internet connection will be outlined here from the easiest (use of an app on Wi-Fi) to the hardest (Manually configuring your hotspot) mind you very simple if you follow along.

METHOD ONE 

 How to share or tether your internet connection via hotspot with the use of an App Called [ISWAT TETHER UNLOCK]

 Note: **Rooting Required 
1. Make sure your hotspot is switched off to start with
2. Click here to download and install ISWAT Tether Unlock for android
    From Google Playstore
          Direct Download File Size 1.6MB
3.       Run the installed ISWAT app and grant it root permissions.

unlock-tether

4.       On the main screen, tap on the “Unlock Tethering” and sit back while it does its works
5.       When the unlocking operation is done, it brings out the pop up “Tethering Unlocked” Have Fun, just enable your already created hotspot and connect the other device or PC.
6.       Start browsing on every connected devices

METHOD TWO

HOW TO SHARE OR TETHER YOUR INTERNET CONNECTION TO PC VIA USB CABLE OR HOTSPOT WITH THE USE OF AN APP [PDANet+]

Note:  Rooting NOT Required    recommended!!!

1.       Make sure your hotspot is switched off to start with
2.       Click here to download and install PDANet+ for android
          From Google Playstore Click Here
          Direct Download Click Here
3.       Run the installed PDANet+ app.  Note that to share the connection with a PC, you have to download the pdanet.exe file for PC installation.
          Click here to Download [File Size: 3.2MB]
4.       On the PDANet Android app main screen, there are three options:
          -      USB Tether
          -      Bluetooth Server
          -      Wifi Hotspot

pdanet_screen

5.       Enable USB debugging on your Android (from the “Developer Options”).
6.       Activate the “USB Tether” option for best reliability and connect your USB cable to the PC
7.       Install the PDANet for PC (if not already installed) and confirm that it is connected to the phone.
8.       Open the PDANet+ menu from the notification bar of your Windows and click on “Connect Internet (USB)”.
9.       It will verify and authenticate your connection automatically and you will be connected via USB.
After successful connection via USB, you can install Connectify on your PC and share the internet with other devices.

METHOD THREE

HOW TO SHARE/TETHER YOUR INTERNET CONNECTION WITH ANOTHER PHONE OR PC VIA WI-FI HOTSPOT WITH MANUAL CONFIGURATION

1.   Create a Wi-Fi hotspot on the main (primary) phone (running the Simple Server).  Use default (no security hotspot or click to see how to create a secured Wi-Fi hotspot connection).
2.   Now go to the other phone/device (secondary) and switch on the Wi-Fi to start searching for available network (if you have used the secured connection, click to show how to connect).
3.    When connected, long press on the connected network name and then tap on “Modify Network”.
4.    On the next screen, tap on the “Show Advanced Options” checkbox to open full settings.

wifi-manual-config

5.    On the proxy settings, select “Manual” (Tap on the “none” for the dropdown options to appear.
6.    Configure as follows:

          -        Proxy Hostname: 127.0.0.1
          -       Proxy Port: 8080
        Leave the rest and tap on “Save

You don’t have to doubt if this is real or not….Just get the software and try it out.  If it doesn’t works as stated above and more….or if you don’t absolutely love it and have more fun using to Browse…just let us know through the comment section below.  But if it works great, why not share with others.

2 comments:

  1. its now made easy, Just connect your SAS or psiphon to a hotspit network using SAS or psiphon .and make sure the config us the same

    ReplyDelete
    Replies
    1. Thank you for the update, it will be good if you elaborate more.

      Delete


EmoticonEmoticon